Search found 42 matches
- Mon May 24, 2021 12:39 pm
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: Suggest a sail maker
- Replies: 1
- Views: 7004
Re: Suggest a sail maker
The original sails came from Triton Sails in Mississauga Ontario. They made my replacement quickly and reasonably priced several years ago. All the best....
- Fri Mar 19, 2021 11:39 am
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: PDQ 36 deck fitting
- Replies: 2
- Views: 7921
Re: PDQ 36 deck fitting
hey John. send me a pic and measurements of what you're looking for and I'll try chasing them down.
- Wed Oct 31, 2018 7:53 am
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: Staying onboard in dry dock
- Replies: 3
- Views: 12791
Re: Staying onboard in dry dock
We're sitting on the keels, 4 supports under the bridgedeck, one under each bow and one under each stern (8 supports in total). I don't believe the keels are designed to carry alot of the weight. Again, all the best.....
Bruce
Bruce
- Thu Oct 25, 2018 8:28 am
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: Staying onboard in dry dock
- Replies: 3
- Views: 12791
Re: Staying onboard in dry dock
We're on board now, for the 8th year, as we get Windrush ready for the winter cruising season. Usually for one or two weeks both at the start and finish of the cruise. There are several PDQs here at Westland in Titusville, all stay aboard on the hard while boat chores are completed. Good luck and al...
- Fri Aug 24, 2018 7:01 am
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: Bottom paint
- Replies: 3
- Views: 8929
Re: Bottom paint
When we do 2 coats, the first coat uses just over 1 gal, and if we're really stingy we can get a second coat with the remainder of the second gal. Our hulls are pretty smooth, without much build-up, so that helps too. Good luck and all the best.....
Bruce
Bruce
- Mon May 28, 2018 6:50 am
- Forum: Classifieds
- Topic: !999 PDQ36 "Ocean Dreamer" for sale
- Replies: 3
- Views: 10007
Re: !999 PDQ36 "Ocean Dreamer" for sale
Congratulations Jim, we'll miss you guys. All the best...
- Tue Oct 17, 2017 3:58 pm
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: Question about tabbing under bulkhead between berths
- Replies: 7
- Views: 14747
Re: Question about tabbing under bulkhead between berths
oops... here's the link http://www.pdq36.com/
- Tue Oct 17, 2017 3:57 pm
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: Question about tabbing under bulkhead between berths
- Replies: 7
- Views: 14747
Re: Question about tabbing under bulkhead between berths
this link will take you to PDQ.com where there are manuals and a wealth of other info. Good luck, all the best and enjoy the PDQ!
Bruce
Bruce
- Tue May 23, 2017 10:50 am
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: PDQ 36 mainsail dacron weight?
- Replies: 9
- Views: 15907
Re: PDQ 36 mainsail dacron weight?
Windrush (36074) had a full baton, 2 reef, 8.62 high aspect Dacron made by Mack Sails back in the fall of 2012. We love it and can recommend Mack Sails. We also got their Mack pack cover and their service was very good. We had them replace a zipper in the mack Pack last spring. Good luck and all the...
- Sun Oct 09, 2016 7:59 am
- Forum: Outboard Engines
- Topic: Replacement Engine(s)
- Replies: 9
- Views: 22300
Re: Replacement Engine(s)
Hi Tom. We purchased our last two engines from Pass-A-Grille Marina (Tray Thomason Pass-A-Grille Marina 727-360-0100, 1901 Pass-A-Grille Way, St. Pete Beach, Fl. 33706) when both Boats.net and the Stuart guy were out of stock. They're on the west coast which is a pain but might be worth a price chec...
- Sat Aug 06, 2016 10:28 am
- Forum: Classifieds
- Topic: Depth gauge
- Replies: 3
- Views: 9807
Re: Depth gauge
It should be just plug and play. I'll send you a pm
- Fri Aug 05, 2016 12:04 pm
- Forum: Classifieds
- Topic: Depth gauge
- Replies: 3
- Views: 9807
Re: Depth gauge
Hi Jim, hope alls well aboard Ocean Dreamer! I also had issues with an old Raytheon display going so dark it became almost unreadable and found a relatively simple fix, although it was not cheap. On Ebay there is a seller called desertdiver1 that sells just the LCD screen and it worked well for me. ...
- Fri May 06, 2016 8:18 am
- Forum: Gear / Equipment / Maintenance
- Topic: Inexpensive Clam Shell Vent Covers
- Replies: 1
- Views: 12481
Re: Inexpensive Clam Shell Vent Covers
What a great idea and solution! Thanks.
- Mon Feb 01, 2016 8:06 am
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: PDQ 36 measurement
- Replies: 2
- Views: 6352
Re: PDQ 36 measurement
My 1999 pdq is 68" from the aft of the hardtop to the aft of the arch where the davit pulley is. Hope this helps.
- Sat Mar 28, 2015 8:18 am
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: Pictures just aren't the same
- Replies: 4
- Views: 7670
Re: Pictures just aren't the same
Hi Lamar. I'm not sure if Titusville is close enough to you but you'll find several 36's at Westland Marina. We're in the Berries right now, waiting to cross early this week to Lake Worth and then move Windrush up to Titusville to be hauled for the summer. PM me if you'd like to meet. All the best.....