PDQ OWNERS FORUM

Found a solution... Ambassador Handle Shower Mixer #135-0132-CP <https://ambassadorfaucets.com/135-0132-CP?search=135-0132-CP>. The replacement is a current shower mixer design - much easier to install and more reliable than the old model used on our PDQ's. This is the second time in a year that Amb...

Thanks, Alan! I finally extracted it from the wall - took about 6 hours. I had to destroy a piece of the chrome cover behind the handle to get to the the shaft that went through the wall. Then it took hours to slowly gouge out chunks of rubberized caulk inside the wall. Once the caulk was gone, I ha...

Has anyone replaced the shower handle valve? Mine starting leaking. I'm having a hard time removing it. I suspect it is NOT a major brand model and probably cannot be fixed. Is the brass "T-fitting" on the opposite side of the shower wall separate from the shower handle valve? This caught ...

Can anyone tell me the brand of the breakers used in the Sub-Panel above the window at the lower helm? I'm installing Gen 3 Starlink and plan to connect a DC to DC power supply (12v to 56v) to a spare breaker on this panel. However, I need to replace a 15 amp breaker with a 25 amp breaker. Are they ...

Starlink has recently changed their product offering: "The Starlink Standard Kit is available to: All customers within the United States & Australia. This kit is available to Residential, Roam, Business and Enterprise customers. Note - the Starlink Standard Actuated is no longer available a...

Has anyone installed Starlink on your PDQ? If you have done so or are planning to add it (like I am), I appreciate hearing how and where you plan to mount the flat rectangular antenna. My plan is to figure out a way to easily and temporarily mount the antenna and run the cable outside the mast down ...

Josh,

Could you tell what kind of "filler" you used to patch your Spray deflector? Mine has a few small nicks that I think could be filled.

We replaced our faulty Princess cooktop in 2016 with a Thetford Spinflo-Topline Cooktop. This 2 burner LP gas cooktop is better built, more reliable, easy to clean and wonderful to cook on (compared to the Princess). The cutout hole needed minor modifications. It is often found in high end motor hom...

I noticed recently that the SeaStar manual for our helm hydraulic system states that the cap on Flybridge helm should be "vented". The upper cap on our system sure looks the same as the un-vented cap at the lower helm. Does anyone have a vented cap on the upper helm? If so, what does it lo...

Brian,

Same boat... My toilet is: Jabsco Quiet Flush Electric Toilet 37045-0092 with Jabsco waste macerator pump 37072-0092.

I have leak in my Starboard hydraulic steering ram. My port ram is dry. The starboard ram just started leaking recently... got a fair amount of oil dripping under it. I have had any steering problems. I'm thinking the source of the oil leak might be 2 things: 1) I filled up my upper helm steering re...

I bought and tried a Scandvik replacement model (#14023)... It does NOT fit the flex hose. I contacted and sent pictures to Scandivk. The president sent a friendly response saying my handle is NOT one of their models. My next try was Ambassador Marine. They bought Shure Marine some time ago. I sent ...

Does anyone know the brand and model for the standard faucet on our PDQ's? The chrome plating has peeled off my handle and I'm searching for a replacement. I'm making a big assumption that most of us have the same galley faucet attached to a flex hose. I thought the brand might be Scandvik, but they...

Which way to my two props rotate? I'm assuming both props turn outward, so that the port prop turns counter-clockwise and the Strb turns clockwise. So the port would be called a LEFT hand prop, the strb is a RIGHT hand prop. Is this correct?

Anyone know where to find a replacement door stop for the entrance door? Mine has aged and is looking like it's close to falling apart. And how to replace it??