Mac,
Ours is a Shurflo. On the back of it there is a tag with a number but I tried looking it up with no success. It said Made In China GB 20030513. The brass fixture on the back of the valve is a part of the valve.
Alan
Search found 205 matches
- Fri Apr 05, 2024 3:51 pm
- Forum: PDQ Powercat Forum
- Topic: Shower Handle valve
- Replies: 4
- Views: 162
- Sun Jan 21, 2024 11:09 pm
- Forum: PDQ Powercat Forum
- Topic: Bowmar hatch gasket?
- Replies: 3
- Views: 1763
Re: Bowmar hatch gasket?
Yes, Joints at the bottom and I did glue them together. I would recommend when you have it all in place make the final cut about 1/4 inch long so it fits tight. I don’t remember what glue I used but it was not a special glue.
- Tue Jan 16, 2024 3:19 pm
- Forum: PDQ Powercat Forum
- Topic: Bowmar hatch gasket?
- Replies: 3
- Views: 1763
Re: Bowmar hatch gasket?
They use the same Bomar gaskets as the as the deck hatches. The gasket seals between the aluminum flange mounted to the deck and the glass frame. They do not attach to the glass. The gasket has a slot in it and it goes over a lip on the window frame. It squeezes between the window frame and glass. T...
- Wed Nov 22, 2023 7:54 am
- Forum: PDQ Powercat Forum
- Topic: Solar System Connection
- Replies: 6
- Views: 7768
Re: Solar System Connection
Our solar is connected directly to the house batteries.
Alan
Alan
- Wed Nov 15, 2023 1:43 pm
- Forum: PDQ Powercat Forum
- Topic: Refrigerator Temp High
- Replies: 4
- Views: 5890
Re: Refrigerator Temp High
Brian, We were having similar issues at one time. Someone suggested taking the drip pan out of the refrigerator side. It made a big difference for us. Also, about a month since a defrost is about as long as we would go. Others have increased the size of the power supply from the fuse panel to the fr...
- Thu Oct 19, 2023 9:35 pm
- Forum: PDQ Powercat Forum
- Topic: Starter Breaker
- Replies: 10
- Views: 5293
Re: Starter Breaker
BJ, check the starter wires and be sure they are tight. They starter solenoid could also be shot.
Alan
Alan
- Sun Jul 30, 2023 11:20 am
- Forum: PDQ Powercat Forum
- Topic: Sticky white vinyl ceilings
- Replies: 7
- Views: 8629
Re: Sticky white vinyl ceilings
It comes in a brown one gallon container. It says Cleaner & Degreaser. Below that it says Formula 88. In my Home Depot it is located on an isle with all types of cleaners.
Alan
Alan
- Thu Jul 27, 2023 4:07 pm
- Forum: PDQ Powercat Forum
- Topic: Sticky white vinyl ceilings
- Replies: 7
- Views: 8629
Re: Sticky white vinyl ceilings
I think we have a better solution. Cleaner/Degreaser from Home Depot. I started the job with alcohol as mentioned in previous posts. It does work but takes a lot of effort and several passes. I decided that it might be easier to take the ceiling panels out to clean them. That turned out to make for ...
- Wed Jul 26, 2023 12:34 pm
- Forum: PDQ Powercat Forum
- Topic: Analog to Digital engine instrument conversion
- Replies: 3
- Views: 3421
Re: Analog to Digital engine instrument conversion
The installer did the programming. It was his first EMU-1 installation and he had to purchase the programmer. He did not charge for it as he figured he would use it on other installations.
- Wed Jul 26, 2023 12:29 pm
- Forum: PDQ Powercat Forum
- Topic: EFCI's
- Replies: 6
- Views: 3836
Re: EFCI's
I am no electrical person but have they tried plugging shore power into the "B" input with the combiner off? If that trips the power then at least you know the problem in definitely in the B side and not the combiner or a combination of A and B together.
- Tue Jul 25, 2023 11:47 am
- Forum: PDQ Powercat Forum
- Topic: Analog to Digital engine instrument conversion
- Replies: 3
- Views: 3421
Re: Analog to Digital engine instrument conversion
Dennis, I added digital while leaving all analog gauges intact when we replaced all the electronics in 2018. It was a great move and the system has worked flawlessly. All the details can be found on my post from August 3, 2020 under the subject Upgrading from Raymarine ESeries to Raymarine Axiom. I ...
- Tue Jul 25, 2023 11:34 am
- Forum: PDQ Powercat Forum
- Topic: EFCI's
- Replies: 6
- Views: 3836
Re: EFCI's
We have experienced the problem and there is an easy fix. We have a Promariner Galvanic Isolater. As John mentioned it sends a signal into the marina electric connection to be sure it is good power. The new power systems sense that and consider it a fault tripping the breaker. After experiencing the...
- Mon Jun 19, 2023 5:26 pm
- Forum: PDQ Powercat Forum
- Topic: Portlight Replacement
- Replies: 5
- Views: 3805
Re: Portlight Replacement
When it comes to replacing the hatches, I used a place in Fort Lauderdale that will make replacements. You either need to take them there and they will cut them while you wait or mail the old one to them to use as a template. I had the do the forward hatches and they fit perfect and match the others...
- Mon Jun 19, 2023 5:13 pm
- Forum: PDQ Powercat Forum
- Topic: Engine Access
- Replies: 3
- Views: 3578
Re: Engine Access
I am going to probably just be stating the obvious. Whenever possible, have an assistant to hand you tools and parts that you find you need but didn't plan on needing.
Alan
Alan
- Fri May 12, 2023 12:00 am
- Forum: PDQ Powercat Forum
- Topic: Galley faucet handle
- Replies: 4
- Views: 1725
Re: Galley faucet handle
Mac,
It is a Price Pfister. I needed to replace the flexible hose. I first ordered a Scandvik but it did not fit. Finally figured out it is a price Pfister. I don't have the faucet model handy but might be able to find it if you need it.
Alan
It is a Price Pfister. I needed to replace the flexible hose. I first ordered a Scandvik but it did not fit. Finally figured out it is a price Pfister. I don't have the faucet model handy but might be able to find it if you need it.
Alan