Search found 89 matches
- Sat Apr 11, 2009 9:34 am
- Forum: Outboard Engines
- Topic: New Yamaha 9.9s installed
- Replies: 21
- Views: 44851
New Yamaha 9.9s installed
Installation of the new, 2009 T9.9 GPXR Yamaha engine for PDQ 32032 MIDORI Information for the new engines is available from YAMAHA 866-894-1626. They do not use E mail, but will FAX the information. The available information such as Model Code Reference Chart and Rigging Information are both valuab...
- Thu Mar 19, 2009 4:14 pm
- Forum: Outboard Engines
- Topic: oil pressure lights
- Replies: 3
- Views: 6909
Re: oil pressure lights
To repair my faulty oil pressure, light, it was off, I removed the wire from the sending unit on the engine, cleaned the corrosion and wala, the light glows strong. The sending unit is in the space surounded by the thermastat, the carb and under the fly wheel. The black ruberboot will come off gentl...
- Thu Mar 05, 2009 7:23 pm
- Forum: Outboard Engines
- Topic: Starting Problems
- Replies: 4
- Views: 6631
Re: Starting Problems
The results, by MIDORI I did think of shooting the engine. Changing the CDI did not do the fix. I pulled the fly wheel, lots of corrosion on the inside surface of the fly wheel which I sanded. I changed the stator and exciter which appears to have fixed the problem. Many thanks to the web sites part...
- Mon Mar 02, 2009 12:44 pm
- Forum: Outboard Engines
- Topic: Starting Problems
- Replies: 4
- Views: 6631
Starting Problems
My 1998 9.9 port engine is not consistently starting. The port engine would stall, when I finally got it started, it was late enough, that I could see that the oil pressure light was not on. Rather than cross to BIMIN I returned from Rodrigues, to Boot Key 9 hours, the engines ran very well. ( I thi...
- Mon Mar 02, 2009 12:28 pm
- Forum: Outboard Engines
- Topic: Engine Model Number
- Replies: 2
- Views: 5039
Re: Engine Model Number
The model was T 9.9 GPXR, long (25") High Thrust remote, electric start, trim and tilt.
MIDORI
32032
MIDORI
32032
- Thu Feb 19, 2009 8:17 pm
- Forum: Outboard Engines
- Topic: New engines
- Replies: 3
- Views: 5734
New engines
Has anyone researched an alternative to the Yamaha 9.9 or 8 hp high thrust motors? Is the original 9.9 a 25 inch shaft?
MIDORI
32032
MIDORI
32032
- Wed Nov 12, 2008 9:12 pm
- Forum: PDQ Altair (PDQ 32) Forum
- Topic: Where to put additional batteries
- Replies: 15
- Views: 19401
Where to put additional batteries
I HAVE A 12 VOLT START BATTERY AND TW0 6 VOLT FOR A HOUSE BANK. I WOULD LIKE TO EXPAND THE HOUSE BANK, IS THERE A SPACE UNDER THE COCKPIT STEP? ANY SUGGESTIONS AND HOW TO ADD THE WIRING.
BRIAN
3232
MIDORI
BRIAN
3232
MIDORI
- Wed Oct 08, 2008 10:47 am
- Forum: PDQ Altair (PDQ 32) Forum
- Topic: Throttle/shift control replacement & cable length
- Replies: 2
- Views: 4749
Throttle/shift control replacement & cable length
32 Altair. As a result a seized cable, I broke the helm control. Does anyone have experience or suggestions on replacing the helm control and port cables? Are there parts availiavle for the B104 controls distributed by ULTRAFLEX (Italy)? Does anyone have the cable lengths for the port engine? The po...
- Tue May 27, 2008 4:57 pm
- Forum: PDQ General Forum
- Topic: Boat Storage
- Replies: 1
- Views: 3657
Boat Storage
I am looking for out of water boat storage for our 32 PDQ MIDORI. I would like to keep her as far south as possible, close to Florida but if necessary as far north as Virginia. What is desireable is safe hurricane storage facility that has a hurricane plan. Any suggestiond welcome. Brian s/v MIDORI ...
- Mon Nov 12, 2007 8:04 am
- Forum: Outboard Engines
- Topic: water circulation 9.9 block
- Replies: 15
- Views: 22579
water circulation
Thanks to Don and Chet. I should be more specific. I removed the thermostat, cleaned out all the junk and filled the block with a "Salt Away" solution, several times. I think this product works. I have great water flow. After reading the historic exchanges between Colin Swithenbank and Rog...
- Sun Nov 11, 2007 10:36 am
- Forum: Outboard Engines
- Topic: water circulation 9.9 block
- Replies: 15
- Views: 22579
water circulation 9.9 block
I have read most of the past posts on this topic. I am checking the water flow prior to heading south. 1998 9.9 Yamaha. The top nipple on the port side has NO water discharge. I removed the nipple and scraped a good teaspoon of crud from the block, it looked more like sand than salt. I have flushed ...
- Thu Sep 13, 2007 4:16 pm
- Forum: Welcome to the PDQ Forum
- Topic: ANOTHER NEW OWNER
- Replies: 11
- Views: 19754
ANOTHER NEW OWNER
After a great road trip, we had the opportunity to look at many PDQs and to meet several owners.
We are pleased to be the new owners of MIDORI.
Brian and Lynn
Manitoba Canada
sv MIDORI
PDQ 32 hull # 32032
lying Heathsville VA
We are pleased to be the new owners of MIDORI.
Brian and Lynn
Manitoba Canada
sv MIDORI
PDQ 32 hull # 32032
lying Heathsville VA
- Thu May 03, 2007 12:18 pm
- Forum: PDQ General Forum
- Topic: whale water lines fittings PDQ 32
- Replies: 2
- Views: 4745
whale water lines fittings PDQ 32
I am trying to repair a leak in my water line to the transom shower. It looks like the cold water line goes to the starboard outside hull wall by crossing under the head bulkhead. The hot water line appears to run forward the shower sump and then down the outside starboard hull. Does this sound fami...
- Wed Jan 24, 2007 4:23 pm
- Forum: Classifieds
- Topic: WANTED PDQ 32
- Replies: 1
- Views: 4590
WANTED PDQ 32
We are interested in purchasing a 32 PDQ. We are currently in Florida and will travel north on the east coast in the weeks ahead. Any information on the availiability of a 32 would be appreciated. bmunroe@mts.net or cell 850 450 5403. Brian & Lynn Munroe sv mistylady We are the new owners of hul...