Search found 48 matches
- Fri Mar 06, 2009 4:18 am
- Forum: Outboard Engines
- Topic: Stators and CDIs
- Replies: 2
- Views: 5171
Stators and CDIs
How many of us have had to replace stators and CDIs and how long do they seem to last? Do stators fail due to corrosion? They do get hot up there on the top of the engine. Add in a little salty air and it would seem a perfect breeding ground for rust. What about CDIs? Do they fail often? How long do...
- Mon Mar 02, 2009 1:56 pm
- Forum: Outboard Engines
- Topic: Engine Model Number
- Replies: 2
- Views: 5031
Re: Engine Model Number
Thank you!
- Mon Mar 02, 2009 7:30 am
- Forum: Outboard Engines
- Topic: Engine Model Number
- Replies: 2
- Views: 5031
Engine Model Number
Hi Folks
Does anyone have to exact model number for the new Yamaha 9.9 four strokes with electric tilt, extra long shaft, high thrust, no tiller, etc.?
Thanks
Does anyone have to exact model number for the new Yamaha 9.9 four strokes with electric tilt, extra long shaft, high thrust, no tiller, etc.?
Thanks
- Tue Jan 13, 2009 5:38 pm
- Forum: Outboard Engines
- Topic: New Engine purchase
- Replies: 8
- Views: 11020
Re: New Engine purchase
Thanks for the feedback. Do you feel that corrosion or water ingress will pose a problem with the engine mount plate that hanging down almost to the waterline? I presume that what you are mentioning is the actual mechanical portion of the mount, not the motor that tilts the engine? I am not 100% sur...
- Mon Jan 12, 2009 4:31 pm
- Forum: Outboard Engines
- Topic: New Engine purchase
- Replies: 8
- Views: 11020
New Engine purchase
Hi Folks I am preparing to order two new Yamaha 9.9's (you know, the ones that actually fit the boat!) I have an older (1992) 36. I have some questions: Does anyone know how long the starboard and port throttle/shifter cables and wiring harnesses need to be? I am not sure what length to order and th...
- Wed Nov 12, 2008 6:10 am
- Forum: PDQ General Forum
- Topic: Parts for Force 10 - 2 Burner Built-in Galley Range
- Replies: 2
- Views: 4746
Re: Parts for Force 10 - 2 Burner Built-in Galley Range
Contact Force 10 directly.
- Thu Oct 02, 2008 11:04 am
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: Hatch Hinges
- Replies: 6
- Views: 11728
Re: Hatch Hinges
The Bomar port light hatch hinges (the ports in the staterooms, head and aft cabin) are prone to wear. Specifically, inside of each hinge there is a very cheap plastic piece with two tiny springy bits that break off. When they break the hatch will no longer stay up on it's own.
- Tue Sep 30, 2008 5:10 pm
- Forum: PDQ General Forum
- Topic: Sewing machines other than SailRite
- Replies: 4
- Views: 6160
Re: Sewing machines other than SailRite
Check out the "Thompson walking foot" machine.
- Sat Sep 20, 2008 8:28 pm
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: water in keel
- Replies: 11
- Views: 13318
Re: water in keel
The keel is divided into three sections. You will need to drain it in the front, middle and stern if there is water in there.
- Mon Sep 08, 2008 2:22 pm
- Forum: PDQ Altair (PDQ 32) Forum
- Topic: Head Replacement
- Replies: 3
- Views: 5267
Re: Head Replacement
If you are going to cruise outside of the USA, the Jabsco is probably the best bet.
- Sat Sep 06, 2008 11:25 am
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: Ground Tackle
- Replies: 22
- Views: 23488
Ground Tackle
Just wondering what everyone carries for ground tackle?
- Tue Aug 12, 2008 7:25 pm
- Forum: Classifieds
- Topic: Importing US reg. PDQ into Canada - Duty?
- Replies: 5
- Views: 8449
Re: Importing US reg. PDQ into Canada - Duty?
You will have to pay PST and GST on the purchase price as soon as the boat arrives in Canada.
- Tue Jul 29, 2008 4:56 pm
- Forum: PDQ General Forum
- Topic: PDQ 36 Electric Outboard Project: Upgrade
- Replies: 10
- Views: 13466
Re: PDQ 36 Electric Outboard Project: Upgrade
(Hull 12) had a diesel engine in one hull and a Yamaha 9.9 in the other.
There was no bow thrust in the boat in 95, of that I am certain!
There was no bow thrust in the boat in 95, of that I am certain!
- Tue Jul 29, 2008 7:35 am
- Forum: PDQ General Forum
- Topic: PDQ 36 Electric Outboard Project: Upgrade
- Replies: 10
- Views: 13466
Re: PDQ 36 Electric Outboard Project: Upgrade
Are there 2 tfuel anks under the cockpit sole?
- Tue Jul 29, 2008 7:24 am
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: Salon Windows
- Replies: 13
- Views: 16623
Re: Salon Windows
I looked online (years ago) for 1/16" Butyl tape and back then found nothing. I dropped in on a local glazier and asked what they had. The owner sold me a roll of 1/16" thick black butyl tape that was large enough to rebed all four Bomar hatches with enough left over to do the job again so...