Page 1 of 1

Does anyone else want to order four bladed props?

Posted: Mon May 28, 2012 8:00 pm
by Golden
Anybody out there with a PDQ 34 that wants to join me in the purchase of a set of 4 bladed props? It is my understanding that if we can organize the purchase of 4 sets or more, there is a significant discount.

Re: Does anyone else want to order four bladed props?

Posted: Tue May 29, 2012 6:57 am
by duetto
hi,

you don't mention whether you have 75 or 100 hp engines.

Re: Does anyone else want to order four bladed props?

Posted: Tue May 29, 2012 3:16 pm
by rkimble
They have the 75 HP engines.

Re: Does anyone else want to order four bladed props?

Posted: Tue May 29, 2012 5:47 pm
by Golden
Thanks, Russ! That's correct, we have 75 hp Yanmars and should have mentioned it.

Re: Does anyone else want to order four bladed props?

Posted: Fri Jun 01, 2012 8:32 am
by Bargain Bill
I have the 75 hp Yanmars and may be ready to bite the bullet and upgrade to the 4-blade props - - any idea of the cost?

Re: Does anyone else want to order four bladed props?

Posted: Wed Jun 13, 2012 5:00 pm
by rlys
H&H Prop in Salem, MA is where we ordered the props. Jim Blanchard is the contact. I also know that Myron on Time for Us is interested in placing an order as well. I just forwarded Jim's info to Myron today.

Re: Does anyone else want to order four bladed props?

Posted: Wed Jun 13, 2012 9:23 pm
by Golden
There are now two of us.

My boat is being hauled tomorrow because I either have a bent port shaft or an engine misaligned. If the shaft is bent, I may be visiting a prop shop and may have some more information. Recently I visited with Precision Propeller in Newburgh, NY and he said that making a set of 4 bladed props for my PDQ is not that big a problem. I hope to find out more tomorrow when I visit a prop shop locally known for their excellent work. I will send out something in the next few days.

Re: Does anyone else want to order four bladed props?

Posted: Wed Jul 18, 2012 12:14 pm
by Katatomic
Just found out I need a new set of props...former owner must of had a lot of galvanic erosion going on in his marina...is there still a need to get four sets for a good discount ...how much are they ? 75 hp yanmars

Re: Does anyone else want to order four bladed props?

Posted: Sat May 04, 2013 1:13 pm
by Semi-Local
Don't know if anyone is looking for a pair of spare 3-bladed props but Diana and I are looking to sell ours.

They came off our MV34 hull 88. We went to 4-blades and don't really want to carry these around with us anymore.

In good condition, definitely some nicks so they are fine as short-term backups or could be reconditioned for longer-term use.

Don't know what would be a fair price but we can figure that out together, as well as a drop-off location or shipping, if anyone is interested.

Best, Mark
mark@semi-local.com

Re: Does anyone else want to order four bladed props?

Posted: Sun May 05, 2013 9:42 am
by duetto
hi mark,

do you have 75s or 100s? i haven't seen any good data on the difference between 3 and 4 blades on the 75s.

Re: Does anyone else want to order four bladed props?

Posted: Sun May 05, 2013 10:51 am
by Semi-Local
Hey John,

We have the 100s. And we like the 4-blades. Quieter below and silent up top. But don't really have much data either … only anecdotal subjective feelings … as we swapped out the 3's to the 4's near immediately.

Best,

Mark