Page 1 of 1

Hatch Vent

Posted: Tue Sep 02, 2014 10:47 am
by Ross Bowling
The forward starboard deck hatch vent needs to be replaced. Looked quickly at West Marine online and did not see anything similar. Any ideas of who makes it? It is a Bomar Hatch.

Re: Hatch Vent

Posted: Tue Sep 02, 2014 10:54 am
by Ross Bowling
BTW, Bomar says the vent is not theirs, must be "after market", any help is appreciated.

Re: Hatch Vent

Posted: Tue Sep 02, 2014 8:36 pm
by thinwater
Photo.

Re: Hatch Vent

Posted: Tue Sep 02, 2014 8:47 pm
by Ross Bowling
Update, I was able to mount the stainless dome directly to the hatch and it seems all is well. The dome had been screwed into 3 plastic spots on the topside of the vent assembly. The plastic just fell apart allowing the dome to dance on the deck.

Re: Hatch Vent

Posted: Wed Sep 03, 2014 7:29 am
by Tanah-Keeta
Try a search on this vent. I think that Dick Tucshick posted about having these in stock.

Re: Hatch Vent

Posted: Wed Sep 03, 2014 12:04 pm
by jbrad
I had the same problem. I beleive it was a Beckson Vent-O-Mate, Model No. - C-6SS - Vent-O-MateĀ® Ventilator with stainless steel cover. You can look it up an their website.
I also think they sell just the plastic replacement parts.

Jimmy B
Mr. Busy

Re: Hatch Vent

Posted: Sat Sep 06, 2014 12:48 pm
by Catrina
I was able to order replacement of entire vent except the Stainless Cover this summer directly from the Beckson Website. it was the C-6D (Guts) = $29.20 plus shipping.

Re: Hatch Vent

Posted: Wed Sep 21, 2016 7:45 pm
by AMCarter3
This thread was very helpful. I need to replace the guts of my Vent-O-Mate on the shower hatch. Finding Beckson and the source of this vent was a very pleasant surprise. THANKS!