Latches for interior portholes

Post here if you want to discuss a topic specific to the MV/32, MV/34, and MV/41.
Post Reply
teamwork
skipper
skipper
Posts: 51
Joined: Tue May 27, 2014 9:32 am

Latches for interior portholes

Post by teamwork » Sun Oct 29, 2017 11:25 am

Does any one have a source for the plastic latches on the portholes?

AlanH
skipper
skipper
Posts: 70
Joined: Mon Apr 25, 2016 3:55 pm

Re: Latches for interior portholes

Post by AlanH » Sun Oct 29, 2017 1:26 pm

All the contact information from my order is below including part numbers. They are Bomar Portlight windows on our 2006. I replaced all the gaskets with 30' of new gasket material and bought 5 of the latches. I only used 3 but wanted a couple of spares.

POMPANETTE,LLC - BOMAR - GRAY
HOOD -ALUM 2000 -AMER.MNE PROD
PO BOX 1200, 73 SOUTH WEST ST.
CHARLESTOWN, NH 03603
Phone: 603-826-5791
Fax: 603-826-4125

Contact Person: TRACY WEST


30.00 6 S517-GASKET FT $6.00 $180.00
GSK F/516/517/716 SSPRT&PASSGE

5.00 6 P100-35 EA $6.00 $30.00
DOG FOR S516-SS, S517-SS, S722


Material Total: 210.00
Tax: 14.70
Balance Due: 224.70
AlanH
Catbo
2006 34' Hull #81
75hp engines

duetto
admiral
admiral
Posts: 674
Joined: Wed Jun 15, 2005 11:18 am
Location: ICW (32043)

Re: Latches for interior portholes

Post by duetto » Sun Oct 29, 2017 8:15 pm

roger,

are you talking about the windows in side of hull or the sliding windows in the rear salon? if in the hull, do you have plastic or steel portlights?

i'll call you tomorrow
john & diane cummings
duetto mv34 #23

Post Reply