hi all,
i have a question about the 1-1/2" sanitation hose going from the toilet to the holding tank.
we have hull #23, OLD STYLE head, and a lavac vacuum toilet. i need to replace the waste hose.
has anyone with an old style head replaced this hose? if so, can you descibe how you did it.
i realize this is a longshot, thanks in advance.
sanitation hose?
sanitation hose?
john & diane cummings
duetto mv34 #23
duetto mv34 #23
Re: sanitation hose?
John,
I don't have your layout but I did replace my hoses last year. Best trick I found was to connect the new hose to the old with a 1 1/2" nylon hose barb coupling, then pull the new in using the old. I used the very flexible Raritan hose that has a 10 year permeation warranty. that "smell" went away instantly when the old hoses were gone. Good luck.
Rafe
I don't have your layout but I did replace my hoses last year. Best trick I found was to connect the new hose to the old with a 1 1/2" nylon hose barb coupling, then pull the new in using the old. I used the very flexible Raritan hose that has a 10 year permeation warranty. that "smell" went away instantly when the old hoses were gone. Good luck.
Rafe
Rafe Williams
"Cat Daddy"
MV34 #32
"Cat Daddy"
MV34 #32
Re: sanitation hose?
thanks for the tip. i am using the saniflex hose. i have used it on 2 other projects.
john & diane cummings
duetto mv34 #23
duetto mv34 #23