I've got a contract on the 2000 36 Classic in Corpus.
It is pending a satisfactory survey. One thing I had not seen before (which includes nearly everything sailboaty ) is a mast joined as depicted in the attached pic. This joint is about four feet up from the step.
I was not able to open your attachment however I can tell you that when PDQ increased the mast height on the PDQ32 they added a four foot section with an internal sleeve and rivets. My boat is a 1999 and the splice seems good as new. Possibly the 36 has the same splice?
Yes, the pdf opened for me, had to save the attachment and open from Adobe Reader. Here it is as a jpg. You can save as jpg just make sure the file is not huge. And after import, select "place inline" and the person viewing will not need to DL first.
Sam
Mast repair.jpg (71.95 KiB) Viewed 19210 times
Sam and Gina Densler
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL
It was a hi-res piccy. Hopefully I'll get a couple of replies that say "Yep, that's what mine looks like! We went through the Queen's Birthday Storm frontwards and backwards without an issue!! Huzzahhhh!!"
Joe,
I have two pdq 36's ( I know....)
This looks like the mast on the "Tall Rig" option model. They couldn't ship the full mast due to length and it would be spliced on site (I think James Power told me this).
Are you sure this isn't the tall rig?
It may be the tall rig. Admittedly, between my lack of expertise and the PO sailing in the great beyond, my due diligence is a tad blurry. Hence, my appearance on this forum. I will definitely know for sure within the next six months(or so).
At this point, I am confident that PDQ designed and built an exceptional vessel. It does not appear to be abused or neglected. I have seen PDQs in this condition. I am hopeful that manuals and other important information will migrate from wherever they are to the boat. It is unlikely that the widow will withhold anything that belongs with the boat.
For instance, the engines are listed as 2-stroke 8 hp version. I think they are more likely the sexy 4-stroke, electric-tilt, 8s that some PDQs sport. Either way, there are engines in the pods now. No carbs though!! Grrrrrr....where would the PO stash the carbs.....I have got to get to that garage...soon...I will be calling every shop in town if they aren't found...
2 PDQs!?! You sir, are a knower of stuff. I'll be back!
Joe,
You almost certainly have the tall rig. My Florida boat has the tall rig and the Chicago boat has the standard rig. The tall rig measures about 54.5 feet off the water. Just tie a cheap line to the halyard and measure. The tall rig is great for light winds, but you need to reef early in heavy stuff. Also, the tall rig will not get under certain Florida bridges (Okeechobee, etc). But it seems that you're in Texas, so that shouldn't be a problem.
Thank ya man. I've been dredging the other site for two years now. Good stuff and tunege(sounds like toon edge) too!!
Brendan,
You are starting to answer questions I had no idea was possible. So, now I have a 36 with a tall rig and sexy 8hp, power tiltable, engines that may. or may not. work without carbs. I've got to get back down to that boat before the survey on Friday. Texas is a big mo frappe! You drive forever to get nowhere. The winter here was a whole lot better than up in Rochester, NY though(like Chi Town, grey and bone-chillin cold). I'll probably stay in Corpus for a year, then start heading East. Then maybe East some more, or perhaps West.
Joe,
Judging from the picture, you also have the Tides Marine sail track system installed on that mast, which is a nice addition. It makes getting the main up and down much easier since friction is reduced. It would cost a few hundred bucks top install yourself and is really necessary for the tall rig.
Regarding the survey, there are a few classic issues that can happen with a PDQ. These are all minor compared to most other boats, so don't worry, but you should be aware of them when you survey the boat.
First, in the front cabins, pull the mattresses off and check for moisture on the bed or the wall. The baby mast stay right above the cabins can allow water in if it isn't properly bedded. If you suspect the baby stay base is leaking, have one person use a hose on it above, while another stays in the cabins and looks for water.
Second, in the bow storage lockers (near the anchor, and similar) there should be one or two inspection ports in each locker. One may be on the floor of the locker and one on the inside wall of each locker. If one or both of these isn't present, don't worry. They exist on some boats and not others. Open these ports and make sure the watertight spaces inside are dry. If not, it isn't the end of the world, just make sure you check for soft fiberglass.