hi,
we have a 2003 which has a "clamshell" cover glued over the 1) fw tank overflow 2) anchor locker drain 3) holding tank vent. we lost the one over the fw tank overflow. does anyone know who made them and where to get? if not a good alternative?
Clamshell covers?
Clamshell covers?
john & diane cummings
duetto mv34 #23
duetto mv34 #23
Re: Clamshell covers?
Hey John, mine came off during the crossing also. Haven't pulled the boat yet, still waiting for some medical procedures. next wed.
Hope somebody comes up with what we need. I'll maybe use a screw or two.
That 37' cat that was next to me is for sale here in Cocoa Beach. $138000.00 Hi to all, RC.
Hope somebody comes up with what we need. I'll maybe use a screw or two.
That 37' cat that was next to me is for sale here in Cocoa Beach. $138000.00 Hi to all, RC.
-
- admiral
- Posts: 270
- Joined: Sat May 08, 2004 1:30 pm
- Location: Washington, NC (34108)
Re: Clamshell covers?
I replaced one on my 34 in 2013. Have been wracking my brain for where I bought it. Just figured it out.
Go to Beckson Marine, choose Plastic Vents and look at #C4A mini clamshell vent. Dimensions are 4 1/4 w by 4 1/8 l by 1 1/2 h.
Attached it with 5200.
Hope it works out for you.
Go to Beckson Marine, choose Plastic Vents and look at #C4A mini clamshell vent. Dimensions are 4 1/4 w by 4 1/8 l by 1 1/2 h.
Attached it with 5200.
Hope it works out for you.
Ron McDaniel
TK III 34108
TK III 34108
Re: Clamshell covers?
Hi Ron, PDQ used the same clam shell vents on all their boats. Our 36 lost a couple also. I replaced them with ones fashioned from PVC pipe and attached them with 5200. They are still in place after many rough passages. Ray
Re: Clamshell covers?
ron,
you are the best....even if you're an rv-er/land dweller these days say hi to sue.
you are the best....even if you're an rv-er/land dweller these days say hi to sue.
john & diane cummings
duetto mv34 #23
duetto mv34 #23
-
- admiral
- Posts: 270
- Joined: Sat May 08, 2004 1:30 pm
- Location: Washington, NC (34108)
Re: Clamshell covers?
Looks like Root's idea is best and cheaper. Mine cost about $25 with shipping.
Ron McDaniel
TK III 34108
TK III 34108
Re: Clamshell covers?
Hi Root, what diameter PVC did you use for anchor locker, and what angle did you cut it? Roger on Teamwork