The PDQ36 has a rubber hose, about 30" long, that switches from 1 bottle to the other in the Propane Locker. One end of th hose is the standard POL bottle fitting and the other is (I believe) a 3/8" pipe thread. I need a replacement!
In looking at all the standard marine catalogs, I see no such hose in that length.
Has anyone replaced this hse and, if so, can offer a suggestion on where to get that configuration.
Roger ford
s/v Kokomo
Propane Hose
Propane Hose
Roger and Bonnie
- SecondWind
- admiral
- Posts: 404
- Joined: Sat May 08, 2004 8:57 am
- Location: Punta Gorda, Fl (33950)
- Contact:
Propane Hoses
Roger,
We replaced everything, including the gas cylinders, when the OPD requirement occured. We have 10 lb. steel tanks with hand tightened fittings, and new hoses with a divider to the pressure gauge and house fittings. We ordered all of the stuff when we were in Baltimore from West Marine. We had to place a special order to get the stuff.
Terry
We replaced everything, including the gas cylinders, when the OPD requirement occured. We have 10 lb. steel tanks with hand tightened fittings, and new hoses with a divider to the pressure gauge and house fittings. We ordered all of the stuff when we were in Baltimore from West Marine. We had to place a special order to get the stuff.
Terry