window leak
Posted by Nando Iannarelli on January 27, 2004 at 15:08:00:
Does anyone have any experience with addressing a leaking wrap around salon
window? PDQ 36.
Follow Ups:
Re: window leak Lee Henderson 15:40:49 01/31/04 (0)
Re: window leak Dan White 02:58:20 01/28/04 (0)
--------
Re: window leak
Posted by Lee Henderson on January 31, 2004 at 15:40:00:
In Reply to: window leak posted by Nando Iannarelli on January 27, 2004 at
15:08:00:
There are a couple articles in the POA Newsletter - Fall 2003 on PDQ Window
repair. You night take a look at them. I replaced all my windows about 5 years
ago myself and have had no leaks ever since. Trick #1 is to use Automotive
Window calking. That's the same stuf they use to instal a window on your car
Trick #2 is not to screw the windows down tight. Screw them down so the calking
seeps out but stop when you have a quarter to an eight inch distance between the
window and the fiberglass. Then let the calking set up. Trick #3 is not to use
countersinked screws. This sets up a weak point at the screw. Use a flat head
screw with a small washer, all stainless. With this approach you will not have
any problems.
window leak
-
- deckhand
- Posts: 2
- Joined: Mon Dec 04, 2017 5:59 pm
Re: window leak
Hello. Here it is 2019 and we are needing to seal salon windows. We saw your post, do you still recommend that process? Thank you.
PDQ 36 Hull 98
Sure & Y-Knot
Captain Earl
PDQ 36 Hull 98
Sure & Y-Knot
Captain Earl
- chicagocat
- admiral
- Posts: 181
- Joined: Tue Aug 03, 2004 2:39 pm
- Location: Chicago (36052)
Re: window leak
Earl,
Are you thinking about actually having new windows fabricated? There's an acrylic and plastics shop here in Chicago that says that if I get them the window, they can reproduce it. I have a couple cracked windows that I was thinking about taking to them.
While I'm waiting, I'd have to do the "poor man's car window thing" with Hefty bags and tape, which I hate, but it seems unavoidable.
Thoughts anyone?
Are you thinking about actually having new windows fabricated? There's an acrylic and plastics shop here in Chicago that says that if I get them the window, they can reproduce it. I have a couple cracked windows that I was thinking about taking to them.
While I'm waiting, I'd have to do the "poor man's car window thing" with Hefty bags and tape, which I hate, but it seems unavoidable.
Thoughts anyone?
PDQ 36052 - 1996 LRC - "Anne Z" - Chicago
and 2001 PDQ 36 Classic (Tall Rig)- "Cat Tales" - Punta Gorda, FL
and 2001 PDQ 36 Classic (Tall Rig)- "Cat Tales" - Punta Gorda, FL
- SecondWind
- admiral
- Posts: 404
- Joined: Sat May 08, 2004 8:57 am
- Location: Punta Gorda, Fl (33950)
- Contact:
Re: window leak
B, Try some flowable silicone for a temporary repair.
Terry Green
s/v Second Wind
36040
s/v Second Wind
36040