Does anyone know the part number for the Marlon sea cock? Or a source to purchase two. The diameter of the hose.
Thanks,Roger Comer Teamwork hull 65
.
Sea cock for 100 hp engine cooling water
Re: Sea cock for 100 hp engine cooling water
Roger,
I rebuilt both of mine last February because I had very small drip at the handle. I dealt with customer service at Forespar (949-858-8820) and they were very helpful identifying what kit was needed. Mine had a 1” interior hose diameter and the rep from Forespar identified it as a Marlon Series 93 model. I am attaching a couple of photos of mine.
Best
Bob Harrington
I rebuilt both of mine last February because I had very small drip at the handle. I dealt with customer service at Forespar (949-858-8820) and they were very helpful identifying what kit was needed. Mine had a 1” interior hose diameter and the rep from Forespar identified it as a Marlon Series 93 model. I am attaching a couple of photos of mine.
Best
Bob Harrington
Bob & Pam Harrington
Out Of The Blue
MV 34 #57
Out Of The Blue
MV 34 #57
Re: Sea cock for 100 hp engine cooling water
Roger,
I did the same as Bob on our Port thru-hull about 4 years ago. My valve was leaking slightly into the hose to the strainer. After rebuilding it, it still leaked a bit, I could not determine the source of the leak, so I replaced it. I’ve attached a useful Valve Maintenance guide from Forespar.
I did the same as Bob on our Port thru-hull about 4 years ago. My valve was leaking slightly into the hose to the strainer. After rebuilding it, it still leaked a bit, I could not determine the source of the leak, so I replaced it. I’ve attached a useful Valve Maintenance guide from Forespar.
- Attachments
-
- M5-Marelon-Valve-Maintenance.pdf
- (60.71 KiB) Downloaded 227 times
Mac Carter
2006 34' PDQ PowerCat "All Heart"; MV 98; twin 100 HP Yanmars
Home Port: Bellingham WA 98229
2006 34' PDQ PowerCat "All Heart"; MV 98; twin 100 HP Yanmars
Home Port: Bellingham WA 98229