Hey Guys,
Does anyone have a supplier/info on replacing the hinge mechanisms on the Bomar hatches? I have several that are broken or failing and I need to come up with something before we take off in November. Any ideas would be greatly appreciated.
-Tom
36041
www.tendervittles.net
Hatch Hinges
- Cat Tales
- admiral
- Posts: 257
- Joined: Tue Sep 06, 2005 7:20 pm
- Location: Boynton Beach, FL (36081)
- Contact:
Re: Hatch Hinges
Check out Pompanette (they now own Bomar). I believe we have the Bomar Extruded Low profile 1000 series hatches, but not sure of the size. There is an online catalog on their website, and this is the link for the spare parts: http://www.pompanette.com/pompweb.nsf/7 ... enDocument
Pompanette
South West Street
Charlestown, NH 03603
tel: (603) 826 5791
fax: (603) 826-4125
Bomar customer service: Bomar@Pompanette.com
http://www.pompanette.com/bomar.
Pompanette
South West Street
Charlestown, NH 03603
tel: (603) 826 5791
fax: (603) 826-4125
Bomar customer service: Bomar@Pompanette.com
http://www.pompanette.com/bomar.
Chris & Kelly Haretos
Formally of s/v Cat Tales, 36081
Boynton Beach, FL
Formally of s/v Cat Tales, 36081
Boynton Beach, FL
-
- 1st mate
- Posts: 48
- Joined: Wed Jan 02, 2008 12:26 pm
Re: Hatch Hinges
The Bomar port light hatch hinges (the ports in the staterooms, head and aft cabin) are prone to wear. Specifically, inside of each hinge there is a very cheap plastic piece with two tiny springy bits that break off. When they break the hatch will no longer stay up on it's own.
Last edited by carib sailor on Wed Jul 29, 2009 12:07 pm, edited 5 times in total.
Re: Hatch Hinges
Hatches or Portlights - it sounds like you are describing a Portlight hinge or am I incorrect? In either case your homemade fix sounds like a good idea!
Phil and Mary DiDomenico
s/v Arabella
36094
"There is more to sailing than ropes and winches, cleats and bulging sails. There are faraway places and the everchanging light, and the silence, and a great peace at the bottom of your soul." - Mate
s/v Arabella
36094
"There is more to sailing than ropes and winches, cleats and bulging sails. There are faraway places and the everchanging light, and the silence, and a great peace at the bottom of your soul." - Mate
-
- 1st mate
- Posts: 29
- Joined: Tue Apr 15, 2008 11:11 am
Re: Hatch Hinges
We had to replace a couple Lewmar side hatch hinges due to breakage of the hinge pins. The Lewmar part # 360270990, West Marine/Port Supply # 10126837. The hinge is called a "Friction Lever" and goes for $30 if you or someone you know has a Port Supply account.
Bacchagato
36075
36075
- Cat Tales
- admiral
- Posts: 257
- Joined: Tue Sep 06, 2005 7:20 pm
- Location: Boynton Beach, FL (36081)
- Contact:
Re: Hatch Hinges
Do you know which Lewmar port we have in the galley and nav areas? Looking at their hatches on the website, it seems like the Medium profile, size 50, seems right.
Chris & Kelly Haretos
Formally of s/v Cat Tales, 36081
Boynton Beach, FL
Formally of s/v Cat Tales, 36081
Boynton Beach, FL
-
- 1st mate
- Posts: 29
- Joined: Tue Apr 15, 2008 11:11 am
Re: Hatch Hinges
The Lewmars on Bacchagato are COASTLINE SZ61Y 09L8 size 61, 577x330mm. New Lewmar seals are part # 360591999.
Bacchagato
36075
36075