port side thru hull

[Old PDQ Message Board]

port side thru hull

Posted by Thomas Gillispie on April 06, 2004 at 06:33:00:

All,

I would like to put a thru hull in the port side near the sink for a saltwater wash down. Has anyone else done this? My 36

only has thru hulls on the starboard side and running 18 feet of hose to get it to the other side isn't really working well.

Mostly, I am interested in where you located the thru hull. There isn't a lot of space down there with the cabinets and all.

Thanks,
Tom

Posted by Roger Ford (kokomo) on April 06, 2004 at 08:35:00:

In Reply to: port side thru hull posted by Thomas Gillispie on April 06, 2004 at 06:33:00:

We had the factory install the salt water foot pump at the galley sink. That thru-hull is located in the same spot in the

port hull as the speed and a/c thru-hull in the starboard. We also have a factory installed deck wash that uses the same

thru-hull as the a/c in the starboard hull. There is no reason you can't tee off another line.

Posted by Sandy Daugherty on April 07, 2004 at 16:00:00:

In Reply to: Re: port side thru hull posted by Roger Ford (kokomo) on April 06, 2004 at 08:35:00:

Come on over to the cheap rent side and look at mine. Hurry, I'm ready to go back in the water!