Page 1 of 1

Repowering with 4jh110 motors

Posted: Thu Dec 19, 2019 7:46 pm
by island time
I am considering repowering from the 75hp motors to the new 4JH110 hp motors, any thoughts or info would be greatly appreciated, prop size , specs . or any other info

Re: Repowering with 4jh110 motors

Posted: Thu Apr 23, 2020 5:12 pm
by Speedo
Hi, sorry for the late reply, but the last few months have been rather hectic. I haven’t been on the forum for months.
So here we go, I purchased a 2006 with upgraded 110’s. They are the Yanmar electronic models. They were installed by the previous owner so I don’t have exact cost numbers, but it was very steep. (Mostly labor costs for installation)
Performance is very good. As a new owner It’s hard for me to compare. They run smoothly and are efficient. I normally cruise at 13.5 knots and burn under 5 gph. WOT is 19.5 knots while burning 11.4 GPH.
Hope this was not too late to help.
Good luck with your choice,
Jim Earl
2006 PDQ
Well Done 38
Yanmar 110’s