Yanmar are very proud of their parts as reflected by their pricing. So I always go shopping. Our boat is a 2003 with 75hp 4 banger its likely the 100hp are the same but don't quote me . The part number is 129670-08351. This is the 200 lb rated version. All 4 mounts are the same. Some Yanmar applications use different ratings on each side ours do not.
Went to good old Ebay , paid $123 a piece shipped (for 4 price). total $520. They came out of CA and shipping via UPS was 5-6 days to Va. TOAD had them for $167 a pop.
Initially purchased 4 because the plan was to just replace the rears on both sides as they appeared OK on the front. Wrong more on that later.
So I ordered another 4.
Good result, tried and tested x2.
Cheers Carl
Motor mount sourcing
Motor mount sourcing
2003 Hull 28 75 hp Belmar (soon to be renamed KARMA)
home port Queens Creek Mathews Va.(Chesapeake Bay)
home port Queens Creek Mathews Va.(Chesapeake Bay)
Re: Motor mount sourcing
I'm curious, why did you need motor mounts?
Mac Carter
2006 34' PDQ PowerCat "All Heart"; MV 98; twin 100 HP Yanmars
Home Port: Bellingham WA 98229
2006 34' PDQ PowerCat "All Heart"; MV 98; twin 100 HP Yanmars
Home Port: Bellingham WA 98229
Re: Motor mount sourcing
Will get more in depth on this later, but so far I have changed out 6, 2 were totally shot, 1 was on its way out, others serviceable. I was in search of shaft wobble cause .All original mounts so 18 yrs old. Most engine manufactures recommend changing at 5 yr intervals so my guess is real worth should be good for 10 yrs. Plan to do a write up when done, it's a bitch of a job to do.
Cheers Carl
Cheers Carl
2003 Hull 28 75 hp Belmar (soon to be renamed KARMA)
home port Queens Creek Mathews Va.(Chesapeake Bay)
home port Queens Creek Mathews Va.(Chesapeake Bay)