PDQ OWNERS FORUM

Yanmar are very proud of their parts as reflected by their pricing. So I always go shopping. Our boat is a 2003 with 75hp 4 banger its likely the 100hp are the same but don't quote me . The part number is 129670-08351. This is the 200 lb rated version. All 4 mounts are the same. Some Yanmar applications use different ratings on each side ours do not.

Went to good old Ebay , paid $123 a piece shipped (for 4 price). total $520. They came out of CA and shipping via UPS was 5-6 days to Va. TOAD had them for $167 a pop.

Initially purchased 4 because the plan was to just replace the rears on both sides as they appeared OK on the front. Wrong more on that later.

So I ordered another 4.

Good result, tried and tested x2.

Cheers Carl

I'm curious, why did you need motor mounts?

Will get more in depth on this later, but so far I have changed out 6, 2 were totally shot, 1 was on its way out, others serviceable. I was in search of shaft wobble cause .All original mounts so 18 yrs old. Most engine manufactures recommend changing at 5 yr intervals so my guess is real worth should be good for 10 yrs. Plan to do a write up when done, it's a bitch of a job to do.

Cheers Carl